Shopping Cart
Can No Hydro Masonry Protection Cream be applied to damp walls

Can No Hydro Masonry Protection Cream be applied to damp walls?

No Hydro Masonry Protection Cream should be applied on dry walls to allow for maximum penetration. After a period of heavy rain, at least 24 hours should pass before applying our masonry protection cream longer during cold times.  Allow at least 2 hours after light rain to pass before applying No Hydro Masonry Protection Cream, Also longer […]

No Hydro Tanking Slurry - No Hydro

Effective Cementitious Tanking Slurry

No Hydro cementitious tanking Slurry is a waterproofing system which creates a monolithic bond using crystalline chemicals when applied to concrete and masonry structures. When mixed with clean water and applied correctly, this forms a permanent waterproof coating to the substrate and is easily applied by brush, trowel or spray. We are always happy discuss […]

Effective On Brick, Concrete & Stone - No Hydro Masonry Water Seal

Brick Concrete & Stone Protection with No Hydro Masonry Water Seal

No Hydro Masonry Water Seal is a brick sealer, concrete and stone sealer protecting properties materials from to changes in weather and drops in overnight temperature. As rain water contacts the treated surface materials it turns to water beads and the water beads roll of the surface materials preventing penetration of the treated substrates. This […]

High Specification Salt Inhibitor - No Hydro Salt Inhibitor

High Specification Salt Inhibitor

No Hydro Salt Inhibitor is a high specification plaster additive recommended following the installation of a remedial DPC. Even though a DPC is effective, hygroscopic salts introduced by rising damp may cause moisture to be attracted to the wall. When a new damp-proof course has been installed it will normally be necessary to hack of […]

DPC Injection Plug Caps - No Hydro 12mm DPC Terracotta DPC Plug

The Importance Of Effective Rising Damp Treatment

Naturally, homeowners want the best available solutions for treating rising damp in their homes. The use of a No Hydro Chemical Damp Proof Course in a property prevents moisture from passing, builds up a barrier against ground salts. No Hydro Damp Proofing Cream has been formulated to form an effective rising damp treatment in walls of […]

High Specification Salt Inhibitor - No Hydro Salt Inhibitor

Replastering After Installing No Hydro Damp Proof Course

With all remedial damp-proofing systems, it is important to remove and replace any salt-contaminated plaster.  When replastering you can use No Hydro Salt Inhibitor, our salt inhibitor is a high-specification plaster additive for use in sand-cement renders after the installation of a remedial damp proof course.  We are always happy discuss our products, please call […]

What Is Rising Damp - No Hydro Damp Proof Cream DPC

What Is Rising Damp?

Rising damp is when groundwater rises up load-bearing walls in capillary action through the fine capillaries and pores of brick and mortar in a wick effect in walls that have no original DPC installed during the construction of a property.  The groundwater rising contains ground salts which are nitrates and chlorides. It is these ground […]

Treating Rising Damp with a DPC - No Hydro Damp Proof Cream DPC

Treating Rising Damp with No Hydro Damp Proofing Cream

The most effective and economical way to treat rising damp is with a damp-proofing injection cream. The cream is injected or hand-pumped into specially positioned holes in the mortar course using a standard mastic gun for the 380ml cartridge and a pump for the 5ltrs of No Hydro damp proof course injection cream. We are always […]

Effective Rising Damp Treatment - No Hydro Damp Proof Cream DPC

Effective Rising Damp Treatment with No Hydro Damp Proofing Cream

No Hydro Damp Proofing Cream (DPC) was developed after years of research and development into damp proofing injection techniques. No Hydro was designed with both DIY and professional contractors in mind.  The cream can be injected with exceptional results while protecting against rising damp. With No Hydro high-performance damp proofing injection cream, you’ll feel confident […]

UNPROTECTED AND PROTECTED NO HYDRO SURFACE - NO HYDRO MASONRY PROTECTION CREAM

Effective Results with No Hydro Masonry Protection Cream

No Hydro Masonry Protection Cream provides effectiveness on concrete, mortar, brick, and sandstone. No Hydro Masonry Protection Cream based formulation is resistant to light rain after just 12 hours and heavy rain after 24 hours. As the product is designed to go deep into masonry, it may take up to two months for a visible “beading […]

Flexible Shipping Wordwide

Next Day Delivery Avaiable

100% Secure Checkout

Debit & Credit / Google / Apple

Easy 30 days returns

30 days money back guarantee

International Warranty

Offered Worldwide