No Hydro Salt Inhibitor is a high specification plaster additive recommended following the installation of a remedial DPC. Even though a DPC is effective, hygroscopic salts introduced by rising damp may cause moisture to be attracted to the wall. As No Hydro Salt Inhibitor is a additive you will only need all required equipment for replastering […]
Equipment needed for No Hydro products
What equipment is required to apply No Hydro Liquid Applied Damp Proof Membrane?
No Hydro Liquid Applied Damp Proof Membrane (DPM) is suitable for application by brush, trowel or suitable spraying equipment. You will also need all required health and safety equipment. Applying by a suitable spraying equipment can allow large sections of the area to be treated quickly. This would not be possible using a brush or roller […]
What equipment is required to apply No Hydro Tanking Slurry?
No Hydro Tanking Slurry is suitable for application by brush, trowel or mortar spraying equipment. You will also need all required health and safety equipment. Applying by a suitable spraying equipment can allow large sections of the area to be treated quickly. This would not be possible using a brush or trowel however they are […]
What equipment is required to apply No Hydro DPC Cream?
No Hydro Damp Proofing Cream (DPC Cream) is suitable for application with a basic mastic / caulking gun for 380ml cartridges or for the 5l bag-in-a-box you can use the No Hydro DPC Pump. You will also need a drill, the correct size drill bit, safety goggles and gloves. Applying by a DPC Pump can allow large […]
What equipment is required to apply No Hydro Masonry Protection Cream?
No Hydro Masonry Protection Cream / Masonry Water-repellent Cream is suitable for application by brush, roller or airless spray. You will also need safety goggles and gloves. Applying by airless spray can allow large sections of masonry substrates to be waterproofed quickly. This would not be possible using brush or roller application. We are always happy […]
